Released for SHOT Show 2020, the Racker by Streamlight is a new edition for the company’s line of weapon mounted lights, and its first integrated design for the Mossberg 500/590 line of shotguns.
Intended as a drop-in replacement for the Mossberg’s forend, the custom light optic produces a focused beam with peripheral illumination that reaches 283 meters before dispersal.
In front of the optic, the Racker included Borofloat glass is designed to have a high degree of heat and impact/abrasion resistance.
The Racker’s integrated weapon light produces 1,000 lumens (20,000 candela) off of two CR123 batteries that give it 1.5 hours of run time.
Along both sides of the Racker, the 4.5” ambidextrous pressure switch allow the operator to select between momentary and continually on function.
The impact-resistant housing of the forend is almost 8” long and made from a polymer/nylon resin that provides ergonomic handling for the support hand.
The Racker is Mossberg compatible to the 7 3/4″ Action slide 500® and 590® series, or works with Remington 870s (with the exception of the Remington 870 Express Supermag).
With its sealed rubber gasket endcap and enclosed housing to provide waterproofing the Racker is IPX7 rated; waterproof for up to 30 minutes.
The Racker comes in Black (featured) and Orange.
Product Evaluation Scores:
- Cost – Excellent (5/5): Coming in at an MSRP of $225, the Racker is a larger, intergraded WML for the more common shotgun styles on the available market. With a light source throwing out 1k lumens, the Racker gives as much light output, or more as other long-gun weapon lights. The closest comparator would be Surefire’s line of forend lights for the Mossberg 500/590 ($399-$599) and Remington 870 shotguns ($399-$599). For a short time EOTech also did offer its Integrated Forend Light ($243.70) forend light, but has since discontinued it. Regardless, as technology has developed, Streamlight’s new Racker is an inexpensive alternative to Surefire’s dominance in the market for intergraded shotgun lights.
- Comfort – Average (3/5): For its textured grip and rigid chassis, the Racker proved to be a very comfortable fit in the support hand that, combined with the angled housing of the light module, served as a good hand stop by which to control the forend. The switch module ran nearly the full length of the grip; however, there wasn’t much of a raised or textured surface on the switch to delineate the tactile feel between that and the chassis. The result was sometimes having to look down to check the position of the thumb on the switch. A recommendation to Streamlight would be to improve the comfort of the switch would be to raise the switch’s surface into a rounded or rubberized feel.
- Durability – Excellent (5/5): The ABS polymer housing of the Racker took a good beating yet never failed. The chassis was struck against the wooden frame of the nearby shooting bench five times each side (10 total strikes) before loading and firing the shotgun, and at no point did the material separate nor become compromised beyond minor surface marring. The light module itself remained firmly inside the chassis and it and the switch module continued to function as normal.
- Functionality – Average (3/5): Functionally, the Racker was designed to be a drop-in replacement for the stock Mossberg forend while adding an integrated weapon light. Its installation was easy and straight forward; however, it would have been nice to have an included forend removal tool, similar to what was included with the Magpul MOE M-LOK forend replacement. Users should take care in ordering the correct Racker for the Mossberg line of shotguns as the 500/590 variant of the Racker (Part # 69600) is slightly different than the 590 Shockwave (##69602) Racker. The latter will still fit on the full-length 500/590, just with the chassis’ shorter overall length it required a spacer to accommodate for the difference. The 1,000 lumens thrown by the Racker made illumination of interior spaces very easy, with a solid central beam for getting into dark corners. The hand strap of the 590 Shockwave variant did not have any adjustability, and did little to secure the forend to the hand. The switch module did have a tangible feel to it that denoted the Racker’s ON/OFF operation. The battery endcap was a little tricky to remove because of its position/angle, but with a wide flat-end screwdriver it was removed to allow access for the CR123 batteries. The Racker did lack the “Safe ON/OFF” feature as found in its other pistol WMLs, such as the TLR-7 and would have made for a nice feature. All of these gave the Racker an appropriate (or average) score with some room for improvement in function.
- Weight – Excellent (5/5): Depending on the model selected (the Mossberg 500®/590® weighed in at 10.78 oz. while the Remington 870™ will weigh in at 11.08 oz.). The weight will vary due to the overall size of the chassis and associated ABS polymer. The switch and light modules are the same in both versions and thus had the same mass. In comparison, the DSF-500/590 forend replacement from Surefire (with 600 lumens) weighed approximately 18.2 ounces and its heavier mass is due to the thicker chassis and rubberized features for added grip. When in production, the IFL from EOTech (with 250 lumens) weighed 12.2 ounces and with its integrated light and design was a closer approximation of Streamlight’s Racker. However, in both alternatives the Racker (with 1,000 lumens) was still the lighter option and demonstrated the excellent lightweight design with current LED technology to deliver superior light output.
Overall Rating – Good (21/25)
I am reviewing this product as a courtesy to the manufacturer and via STL Shooting Enthusiasts, so that I can evaluate it and provide my honest feedback. I am not bound by any written, verbal, or implied contract to give positive reviews. All views are my own, and based off my personal experience with the product.
The views and opinions expressed on this website are solely those of the author. The views and opinions do not necessarily represent those of the administrative staff, and/or any/all contributors to this site.